Plus One Computer Science Previous Year Question Papers and Answers 2017

Plus One Computer Science Previous Year Question Papers and Answers 2017 are part of Plus One Computer Science Previous Year Question Papers and Answers. Here we have given Plus One Computer Science Previous Year Question Papers and Answers 2017.

Board	SCERT
Class	Plus One
Subject	Computer Science
Sample Paper Set	2017
Category	Plus One Previous Year Question Papers

Plus One Computer Science Previous Year Question Papers and Answers 2017

Time Allowed: 2 hours
Cool off time: 15 Minutes
Maximum Marks: 60

General Instructions to Candidates :

There is a ‘cool off time’ of 15 minutes in addition to the writing time of 2
Use the ‘cool off time’ to get familiar with the questions and to plan your answers.
Read questions carefully before you answering.
Read the instructions carefully.
Calculations, figures, and graphs should be shown in the answer sheet itself.
Malayalam version of the questions is also provided.
Give equations wherever necessary.
Electronic devices except non-programmable calculators are not allowed in the Examination Hall.

Answer all questions from l to 5

Question 1.
The number (158)₁₀ can be represented in Hexadecimal number system as……..

Question 2.
a. Write the following memory devices in the order of their speed, (fastest to g slowest order)
1. Cache
2. RAM
3. Hard disk
4. Registers
b. What do you mean by freeware and shareware?

Question 3.
Pick the odd one out and give a reason for your finding.

Question 4.
(a) Name the type of loop which can be used to ensure that the body of the loop will surely be executed at least once.

(b) Consider the code given below and predict the output.

for (int i = 1; i < = 9; i = i + 2)
{
if (i = = 5) continue; 
cout >> i << " ";
}

Question 5.
Find the value of score [4] based on the following declaration statement.

score [5] = {98, 87, 92, 79, 85};

Question 6.
Name the built-in function to check whether a character is alphanumeric or not.

Question 7.
a. Different networks with different protocols are connected by a device called
1. Router
2. Bridge
3. Switch
4. Gateway
b. Define Protocol.

Question 8.
Find the best matches from the given definitions for the terms in the given list. (Worm, Hacking, Phishing, Spam)
a. Unsolicited e-mails sent indiscriminately.
b. A technical effort to manipulate the normal behavior of the networked computer system.
c. A stand-alone malware program usually makes the data traffic slow.
d. Attempt to acquire information like usernames and passwords by posing as the original website.
e. Appear to be useful software but will do damage like deleting necessary funds.

Question 9.
Represent -3 8 in 2’s complement form.

Question 10.
Write an algorithm to print the numbers up to 100 in reverse order. That is the output should be as 100, 99, 98, 97,….,
OR
Draw a flowchart to check whether the given number is positive, negative or zero.

Question 11.
Identify the invalid literals from the following and write a reason for each.
a. 2E3.5
b. “9”
c. ‘hello’
d. 55450

Question 12.
The following C++code segment is a part of a program written by Smitha to find the average of 3 numbers.

int a, b, c;                                                        
float avg;                                                         
cin>>a>>b>>c; 
avg = (a+b+c)/3;   
cout<<avg;

What will be the output if she inputs 1,4 and 5? How can you correct it?

Question 13.
Let M[3][3] be a 2D array that contains the elements of a square matrix. Write C++ statements to find the sum of the diagonal elements.

Question 14.
What are the advantages of using gets() function in C++ program to input string data? Explain with an example.

Question 15.
Read the function definition given below, Predict the output, if the function is called as convert

void convert (int n)
{ 
if (n>l) convert (n/2); cout<<n%2;
}

Question 16.
Compare any three features of five generations of computers

Question 17.
Draw the logic circuit of Boolean expression:
$(A+\bar { BC)+ } \bar { AB\quad }$
OR
Using algebraic method, prove that
$\bar { Y } .\bar { Z } +\bar { Y } .Z+Y.Z+Y=1$

Question 18.
“It is better to give proper documentation within the program”. Give a reason.

Question 19.
Briefly explain the three components in the structure of a C++ program.

Question 20.
Write an algorithm for arranging elements of an array in ascending order using bubble sort.

Question 21.
Explain the difference between call-by¬value method and call-by-reference method with the help of examples.

Question 22.
Compare any three types of networks based on span of geographical area.

Question 23.
Susheel’s e-mail ID is susheel@gmail.com. He sends an e-mail to Rani whose e-mail ID is rani@yahoo.com. How is the mail sent from Susheel’s computer to Rani’s computer?

Question 24.
With the help of a block diagram, explain the functional units of a computer.

Question 25.
Write a program to check whether the given number is palindrome or not. (5)
OR
Write a program to print the leap years between 2000 and 3000.
(A century year is a leap year only if it is divided by 400 and a non-century year is a leap year only if it is divided by 4.)

Answer

Answer 1.
9E

Answer 2.
a. Registers, Cache, RAM, Hard disk
b. Freeware refers to copyrighted computer software which is made available for use free of charge for a unlimited period.
Shareware refers to commercial software that is distributed on a trial basis. It is distributed without payment and with limited functionality.

Answer 3.
(c) ; Others has only one entry flow and one exit flow.
(b) ; Used for both input and output operations.

Answer 4.
a. do while loop
b. l 3 7 9

Answer 5.
85

Answer 6.
isalpha( )

Answer 7.
a. (iv). Gateway
b. Protocols are rules and conventions for transmitting data.

Answer 8.
a. Spam
b. Hacking
c.Worm
d. phishing

Answer 9.

Answer 10.
Let i be the variable.
Step 1: Start
Step 2: Let i = 100
Step 3: Print i
Step 4: i = i – 1
Step 5: If i>=1, then goto Step 3
Stop 6: Stop
OR

Answer 11.
Invalid literally are:
(a).2E3.5; the fractional number cannot be used as an exponent.
(c). ‘hello’; String literals are enclosed within a pair of double quotes.

Answer 12.
The output will be 3.
(a+b + c)/3.o
or float (a+b+c)/3
or int a, b, c are replaced by float a, b, c or use of typecasting

Answer 13.

#include <iostream> 
using namespace std;
int main( )
{ 
int m[3][3], n, i, j, s=o;
cout<<“Enter the rows/columns of square matrix:
cin> >n;
cout<<“Enter the elements\n”; 
for(i=o; i<n; i++)
for(j=o; j<n; j++)
cin>>m[i][j];
cout<<“Diagonal elements are\n”; for(i=o; i<n; i++)
{
cout<<m[i][i]<<“\t”; s = s + m[i][i];
}
cout<<“\nSum of Diagonal elements is:
cout<<s; return o;
}

Answer 14.
By using gets( ) function we can input string with white space.
cin statement reads till a white space. But the function gets() is used to accept a string of characters including white spaces from the standard input device (keyboard) and store it in a character array.
eg., char str[3o];
gets(str);
puts(str);

Answer 15.
The output will be 111.
This is a recursive function. The process of calling a function by itself is known as recursion and the function is known as a recursive function.

Answer 16.
First generation computers (1940-56): The first generation computers were built using vacuum tubes. This generation implemented the stored program concept, eg., Electronic Numerical Integrator and Calculator (ENIAC), Electronic Discrete Variable Automatic Computer (EDVAC), Universal Automatic Computer (UNIVAC).

Second generation computers (1956-63): In this generation computers, vacuum tubes were replaced by transistors. This allowed computers to become smaller and more powerful and faster. The manufacturing cost was also less. The concept of programming language was developed. Programming languages FORTRAN and COBOL were introduced, eg., IBM 1401, IBM 1620.

Third generation computers (196471): These are smaller in size due to the use of integrated circuits (IC’s). IC drastically reduced the size and increased the speed and efficiency of computing. Keyboards and monitors were introduced. The high-level language BASIC was developed during this period, eg., IBM 360, IBM 370.

Fourth generation computers (1971 onwards): The computers that we use today belong to this generation. These computers use microprocessors and are called microcomputers use Large Scale of Integration (LSI). These computers are smaller in size and have faster accessing and processing speeds, eg., IBM PC, Apple II.

Fifth generation computers (future): These are based on artificial intelligence. The fifth generation computing also aims at developing computing machines that respond to natural language input and are capable of learning and self-organization.

Answer 17.

Answer 18.
Documentation is an on-going process that starts in the problem study phase of the system and continues till its implementation and operation. We can write comments in the source code as part of the documentation. It provides sufficient information in a program to understand its working. If the program is documented, it helps to understand the logic we applied. It helps the debugging process as well as program modification at a later stage.

Answer 19.
1. Preprocessor directives: A C++ program starts with preprocessor directives. Preprocessors are the compiler directive statements which give instruction to the compiler to process the information provided before actual compilation starts. The #include is used to link the header files available in the C++ library. There are some other pre-processor directives such as #define, #undef, etc.

2. Header files: It contains the information about functions, objects, and predefined derived data types and they are available along with compiler. The header file stream contains the information about the objects cin and court.

3. The main( ) function: The execution starts at main ( ) and ends within main ( ). If we use any other function in the program, it is called (or invoked) from the main Q. The function header main ( ) is followed by its body, which is a set of one or more statements within a pair of braces { }. This structure is known as the definition of the main f) function. Each statement is delimited by a semicolon (;).

Answer 20.
Step 1: Start
Step 2: Accept a value in N as the number of elements of the array.
Step 3: Accept N elements into the array AR.
Step 4: Repeat Steps 5 to 7, (N -1) times.
Step 5: Repeat Step 6 until the second last element of the list.
Step 6: Starting from the first position, compare two adjacent elements in the list. If they are not in proper order, swap the elements.
Step 7: Revise the list by excluding the last element in the current list.
Step 8: Print the sorted array AR.
Step 9: Stop

Answer 21.
Call by value method:
1. Ordinary variables are used as formal parameters.
2. Actual parameters may be constants, variables or expressions.
3. The changes made in the formal arguments are not reflected in actual arguments.
4. Exclusive memory allocation is required for formal arguments.

eg., void change find n)   
{  
n = n + 1;
cout << “n =” << n << ‘\n’;
}
int main( )
{
int x = 20; 
change( ); 
cout << “x = ” << x;
}

Here only the value of the variable x is passed to the function. Thus the formal parameter n in the function will get the value 20. When we increase the value of n, it will not affect the value of the variable x. The output of the above code is n = 21, x = 20 Call by reference method:

Reference variables are used as formal parameters.
Actual parameters will be variables only.
The changes made in the formal arguments are reflected in actual arguments.
The memory of actual arguments is shared by formal arguments.

eg., void changefint & n)
{
n = n + 1;
cout << “n = ” << n << ‘\n’;
}
int mainf)
{
int x=20;
change(x);
cout << “x = ” << x;
}

Here the output will be n = 21, x = 21

Answer 22.
The network is classified based upon the amount of geographical area that covers.
1. Personal Area Network (PAN): It is used to connect devices situated .in a small radius by using guided media or unguided media.

2. Local Area Network (LAN): This is used to connect computers in a single room or buildings of one location by using twisted pair wire or coaxial cable, Data transfer rate is high and the error rate is less.

3. Metropolitan Area Network (MAN): It is a network spread over a city, MAN have lesser speed than LAN and the error rate is less. Here optical fi- J ber cable is used, eg., Cable TV network.

4. Wide Area Network (WAN): This is used to connect computers over a large geographical area. It is a network of networks. Here the computers are connected using telephone lines or Microwave station or satellites. The error rate in data transmission is high, eg., internet.

Answer 23.
When an e-mail is sent from your computer, it first reaches the e-mail server of our e-mail service provider. From there the e-mail is routed to the recipients e-mail server through the internet. The recipient’s e-mail server delivers the e-mail to recipients inbox which stores the message. SMTP (Simple Mail Transfer Protocol) is used e-mail communication.

Answer 24.
Functional units of a computer are based on a model proposed by John Von Neumann. It consists of some functional units namely Input Unit, Central Processing Unit (CPU), Storage Unit and Output Unit.

1. Input unit. The collected data and the instructions for their processing are entered into the computer through the input unit. They are stored in the memory (storage unit). The data may be in different forms. Keyboard, mouse, scanner, mic, digital camera, etc. are some commonly used input devices.

2. Central Processing Unit (CPU). The CPU is the brain of the computer. In a computer system, all major computations and comparisons are made inside the CPU. It is also responsible for activating and controlling the operations of other units of the computer. The functions of CPU are performed by three components; Arithmetic Logic Unit (ALU), Control Unit (CU), Registers.

3. Storage unit. The data and instructions entered in the computer through input unit are stored inside the computer before actual processing starts. The information or results produced after processing are also stored inside the computer, before transferring to the output unit. The intermediate results, if any, must also be stored for further processing.

4. Output unit. The information obtained after data processing is supplied to the outside world through the output unit in a human-readable form. Monitor and printer are the commonly used output devices.

Answer 25.

#include <iostream>
using namespace std; 
int main()
{
int num, c, digit, rev=o; 
cout<<“Enter the number:";
cin> >num; c=num;
while(num != o)
{
digit = num % 10;                                 '
rev = (rev * 10)+ digit; 
num = num/10;
}
cout<<“The reverse of the number is”
<<rev; 
if (rev == c)
cout<<“\nThe given number is a palindrome.";
indrome.”; else
cout<<“\nThe given number is not a
palindrome.”;
return o;
}
OR
#include <iostream> 
using namespace std;
void main()
{
int i;
for (i=2000; i<=3000; i++) {
if (i%4 == o)
{
if (i%400 == o) cout << i;
}
return 0;
}

You can also Download Plus One Computer Science Previous Year Question Papers and Answers to help you to revise complete Syllabus and score more marks in your examinations.

We hope the Plus One Computer Science Previous Year Question Papers and Answers 2017 help you. If you have any query regarding Plus One Computer Science Previous Year Question Papers and Answers 2017, drop a comment below and we will get back to you at the earliest.

Plus One Computer Science Previous Year Question Papers and Answers 2017

Footer